1. Home
  2. Useful Info
  3. Scanner Configuration

Scanner Configuration

How to configure a barcode scanner in Alice

  1. Install the driver and barcode according to the suppliers procedure
  2. Launch Alice with an account that has system administration rights
  3. Open the Configuration menu.
  4. Go to the General tab.
  5. In the Scanner section.
  6. Define the Type and Port of your barcode scanner

  1. Here are the most common barcode scanners:
    • LS2208 Type: USB-Serial Port: COM3. The right COM Port should be automatically detected, if the scanner doesn’t work, try a different port.
    • Voyager 1250G, Eclipse ES250A, Eclipse ES200BT Type: USB-Hid HID Device: “HID compliant vendor defined device”. You must find the right one, try each of them until you find the right one.
  2. Once the scanner type has been selected, the port can be changed using the Scanner button, it is located on the bottom right corner or the main Alice window. This icon on the button also indicates the status of the configured scanner.

Print Friendly, PDF & Email